Brandt AD9905B, Руководство пользователя

Страница: 5 / 12

1
7

Troubleshooting
Symptoms Possible Cause Action
with new sets
Replace charcoal filters
High temperature safety
Poor airflow
Motor running but no airflow
Charcoal grease filters
clogged
Butterfly valve jammed
Contact technician
The kitchen is not
sufficiently ventilated
Clean the filters and replace
when dry
In recirculation mode,
charcoal filters must be
installed. Otherwise, if
charcoal filter is clogged,
replace the charcoal filter
Wash the aluminium
grease filters
Contact technician
Foreign object in contact
with fan blade
Whirring sound
Oil dripping onto stove
Aluminium grease filter
saturated
Strong cooking smell
Charcoal filters not
installed/ are not operating
optimally
device activated
Motor cuts after a few
minutes
Thehood is installed too
near the cooking stove
The hood must be at least
65cm from stove
Does not function
Check that the plug is
connected.
No electrical supply
Check that the main switch
is turned on.
Aluminium grease filters
clogged

SAFETY : Read this First !












Green & Yellow = EARTH
Blue = NEUTRAL
Brown = LIVE




2
Check the appliance for damage before and after unpacking it.
Do not connect the appliance if it has been damaged.
Read this user manual thoroughly before attempting to use this appliance.
This appliance may be used safely if it is correctly installed according to the
provided safety instruction by a qualified installer. The installer is
responsible for ensuring that the appliance works correctly at its installation
location. Brandt Asie Pte Ltd is not liable for damage caused by
incorrect installation or connection, and such damages are not covered
under warranty.
It is dangerous to modify any part of this appliance.
Brandt Asie Pte Ltd is not liable for damages in case of failure to adopt
proper safety measures.
Ensure the location in which this appliance is installed is well ventilated.
This appliance should not be used to ventilate a room.
The distance between the bench top to the lower part of the hood is
recommended to be between 650mm – 750mm.
Use an electrical connector with earth that is suitable for your location.
Check that the voltage in your location is suitable for supply to this product.
The electrical connection of this appliance must be connected to earth.
Multiple plugs and extension cables should not be used in conjunction at a
time. Overload is dangerous and may cause a fire.
Ensure that the power supply cord is away from any heat source or sharp
objects.
The product should be switched off and the electrical supply disconnected
before any cleaning or maintenance work is carried out, or if the appliance
is unused for extended periods.
Remove all plastic covers or wrappings on the product and its attachments