Brandson Equipment 305274, Руководство пользователя

Страница: 26 / 64

26
English
You can select the device power using the "ECO / OFF / MAX" switch. Select
"ECO" if you want less intense, but more power efficient cooling / heating. Select
"MAX" if you want maximum heating / cooling performance. You can switch off
the device by moving the switch to the centre "OFF" position.
The recommended waiting time for cooling is 2 hours and for heating 30 minutes.
6. Cleaning and Care
Disconnect the plug and allow the device to cool down completely before clean -
ing. The device should not be treated with liquids or even immersed in liquids for
electrical safety reasons.
Never use harsh or abrasive cleaning agents.
Wipe the cover with a damp cloth and then dry it completely.
The container may be cleaned with a damp cloth and with some mild cleaning
agent if necessary.
Allow the cooler box to dry completely before using it again.
7. Safety instructions and disclaimer
Never try to open the device to repair or make modifications. Avoid contact with
the mains voltage. Do not short-circuit the product. The device is not approved for
outdoor use. Therefore please use it only in dry surroundings. Protect it from high
humidity, water and snow. Keep the device away from high temperatures. Do not
expose the device to sudden changes in temperature or strong vibrations, as this
could damage the electronic components.
Check the device for any damage before using it. The device should not be used if
it was subject to impact or has been damaged in some other manner. Please com -
ply with the local regulations and restrictions. Do not use the device for purposes
other than those described in the user manual. This product is not a toy. Keep it out
of the reach of children or mentally disabled persons. Any repair or modification to
the device, which is not carried out by the original supplier, will void any warranty
and guarantee claims. The device should be used only by persons who have read
and understood this user manual. The specifications of the device may be changed
without any special prior notification.