INSTALLATION INSTRUCTIONS
Vehicle Wiring: When wiring the kit on some applications there might not be access to some
of the trigger wires. (Left, Right turn signals, Reverse, etc.) When trigger wires are not available
use toggle switch to trigger input. Trigger wires are only needed for auto switching inputs. Can
Manual switch video inputs on monitor.
Rear Camera wiring: Camera needs 12-volt accessory power and Chassis ground from a
clean non-painted surface. Also needs the composite video output cable ran to Video inputs on
monitor. (1-3). Can be hooked up to desired orientation on video screen. All outside
connections please use supplied heat shrink as to not VOID WARRANTY.
SUTV-1020V2 8-10-20
Page 3 of 3
