INSTALLATION INSTRUCTIONS
Jeep Wrangler Adjustable Infrared Light Rear Vision Camera
System for Factory Display Radios
2007 – Current (Kit # 9002-8858)
Items Included in the Kit
Camera
Chassis Harness
Power Harness
22--pin white connector w/ video RCA (for
factory display radio)
Zip lock bag with 15 Wire Ties & 3 Push Nuts
Camera Extension Bracket
These Instructions
Required Tools & Supplies
T15 & T20 Torx Bits
7mm & 10mm Sockets
Phillips Screwdriver
3/8” Wrench or Socket Drive
Plastic Trim Removal Tool
Soldering Iron, Solder, & Heat Shrink Tubing
(RECOMMENDED) or T-taps as an alternate
splicing method
Electrical Tape
Please read so you do not VOID the warranty:
If the camera harness is run through the center on the camera
bracket, it will cut the camera harness. This will void the
warranty on the camera.
NOTE: We strive to provide accurate and up-to-date installation instructions. For the latest full color
instructions, as well as an installation video, please visit www.brandmotion.com
9002-8858 Instructions 6-10-19.docx
Page 1 of
7
KB
