INSTALLATION INSTRUCTIONS
Step 24: Remove (2) 7mm bolts on both sides of the
steering column.
Step 25: Remove center stack/cluster surround.
Step 26: Remove glove box for access and run Mirror
Harness toward center of dash.
Step 27: Using a plastic trim removal tool, remove
HVAC panel.
Step 28: Connecting Power
Splice Red power wire to White/Grey reverse wire in
passenger kick panel (Engage parking brake and verify
reverse wire has 12v only when vehicle is in reverse).
Splice Black Ground to chassis ground. RECOMMENDED:
Use solder and cover with heat shrink tubing or use
T-taps as an alternate connection method.
Step 29: Plug the Chassis Harness RCA connector into
provided jumper harness.
Step 30: Insert the white 22-pin connector into the
back of radio.
9002-8847 Instructions 6-10-19.docx
Page 6 of
7
KB
