*C: The parameters are preset with the default values specified in the table during production.
the value of the parameter = LS + R x
65535
( HS
LS )
65535
( HS
LS )
( W
LS ) x
*D: The scale values specifiy the transformation relation between the value of parameter and the value of
register. The parameter with a scale low value is stored in the register with a number zero. The parameter
with a scale high value is stored in the register with a number 65535.
For example , if a value R is read from the addressed register, and LS = scale low value,
HS = scale high value, then
Similarly, before writing the value of parameter to the addressed register, the value W of the parameter
must be transformed according to the following formula :
Note that the value stored in the register is always positive value.
*E: The unit PV means that the unit of parameter is the same as the unit of PV (process value ).The unit of
PV is determined by PVMD, IN1, IN2, IN1U, and IN2U.
*E1: Unit determination for A1SP, A1DV and A1HY
Unit same
as unit of
If A1FN =
DE.HI, DE.LO
DB.HI, DB.LO
PV1.H
PV1.L
PV2.H
PV2.L
P1.2.H, P1.2.L
D1.2.H, D1.2.L
PV
PV1
PV2
PV1, PV2
*E2: Unit determination for A2SP, A2DV and A2HY
Unit same
as unit of
If A2FN =
*E3: Unit determination for RAMP
Unit =
Same unit
as unit of
*E4: Unit determination for AOLO and AOHI
*E5: Unit is the same as unit of PV1 ( IN1 )
*E6: Unit is the same as unit of PV2 ( IN2 )
If AOFN =
122
UM25001H
