Brainboxes CC-346, Руководство пользователя

Страница: 19 / 58

PCI Quad 422/485 Card Chapter 5 Windows 3.x Software Configuration.
•
16
Chapter 5 Windows 3.x
Software Configuration.
Introduction
The Windows 3.x installation procedure consists of two steps after the PCI
RS422/485 card is inserted:
1. Determining the resources that the PCI RS422/485 card has claimed.
2.Informing Windows 3.x of those resources.
Whenever certain values have been entered or changed in the hardware settings
window, a message prompting to restart Windows will appear. Only after having
made ALL the necessary changes restart Windows so that the new settings come
into effect.
Determining PCI Resources.
Insert the card into a PC, as described in Chapter 3 .
Run BBCARDS.EXE, from the supplied “Serial Solutions CDROM” by typing
the following:
D:\diskimg\ssutil\pci\BBCARDS
Where D:\ is the Letter of your CDROM drive
BBCARDS.EXE will return a string that looks similar to the following (values
contained in the string may differ in individual PC's due to resource availability):
card 1 is on bus 0, device 16, function 0
Card ID=5, revision 1: 4 Port Velocity RS422/485
interrupt line 11 has been assigned
4 sets of 16550-compatible registers
are at I/O address 0140
Baud clock control is at I/O address 02d0
Write 0xf6 for /8 (default), 0xf2 for /4, 0xd6 for /2,
0xd2 for /1.
Note down IRQ and I/O which in this case:
The IRQ = 11
The I/O address = 0140
Windows 3.x Driver Installation.
Place the supplied Serial Solutions CDROM in a suitable drive. From File
Manager choose ‘Run’ and enter
D:\diskimg\sswin3x\setup
(where D:
is the path to the CDROM drive Containing the disk).