Brainboxes 1 Port Rs232 Card, Руководство пользователя

Страница: 20 / 67

1 Port RS232 Card Chapter 5
•
17
Chapter 5
Windows 3.x Installation
Introduction
The Windows 3.x installation procedure consists of two steps after the PCI Dual
RS232 CARD is inserted:
1. Determining the resources that the PCI Dual RS232 Card has
claimed.
2. Informing Windows 3.x of those resources.
Insert the PCI 1 Rs232 Card into your PC, as described in Chapter 3
Installing the Card, and restart.
Determining PCI 1 Port RS232 Resources.
Run BBCARDS.EXE, from the supplied Serial Solutions CDROM:
Place the supplied Serial Solutions CDROM disk in a suitable drive. From File
Manager choose ‘Run’ and enter
<Drive>:\diskimg\ssutil\pci\bbcards
(where <drive>: is the letter of your CDROM drive).
BBCARDS.EXE will return a string that looks similar to the following (values
contained in the string may differ in individual PC's due to resource availability):
card 1 is on bus 0, device 16, function 0
Card ID=5, revision 2: 1 Port RS232
interrupt line 11 has been assigned
1 sets of 16550-compatible registers is at I/O address
0140
Note down IRQ and I/O address, which in this case are:
The IRQ = 11
The I/O address = 0140