Brady TLS PC Link, Руководство программиста, Страница: 19 / 64

TLS PC Link
TM
Programmer’s Guide 14
Enable Feeding to Cut Position after Print and Perform a Feed to
Cut (STX c)
This command will feed the printer to the cut position. It will also enable feeding
to the cut position after all future print commands. It is to be used in conjunction
with STX C.
<STX>c
Feedback possibilities (only sent if feedback characters are turned on):
1,2,6,7,8,A,B,E,F,J
Set Quantity for Stored Label (STX E)
This command sets the number of labels to print for the label format currently
stored in the print buffer. The most recent label sent to the printer will
automatically remain stored in the buffer until the printer is reset, turned off, or a
batch is canceled. This command is also used in conjunction with the STX G
command, which will print the labels.
<STX>Ennnn
Where:
nnnn- a four-digit quantity, including leading zeros
Sample:
<STX>E0025
<STX>G
The above sample will print 25 labels of the current label format in memory.
Feedback possibilities: 0,1,2