Brady markware, Руководство пользователя

Страница: 12 / 33

¡
5
Installing the Application
The MarkWare application software and Brady print drivers are shipped on a
single CD-ROM. A standard Windows setup wizard guides you through the
installation procedure.
The installation allows you to install both the application and Brady print drivers at
the same time. For more information on installing Brady print drivers, see the
Print
Driver Installation Sheet that was shipped with the application or the
documentation that accompanied your printer.
Hint! You need to uninstall and then reinstall all Brady print drivers from your
PC for the application to function properly. For more information on
uninstalling Brady print drivers, see the documentation that accompanied
your printer.
Use the following procedures to install and uninstall the application components.
Hint! Before you begin the installation procedure, close all open applications
and disable all anti-virus software on your PC.
To install the application
1. Insert the installation CD into your CD-ROM drive.
If your PC does not automatically launch the installation wizard, click Start on
the Windows taskbar and select
Run . Type D:\Setup.exe and click OK , or
click the Browse button and select the desired path. (Substitute the letter
corresponding to your CD-ROM drive if it is not labeled D.)
The Choose Setup Language dialog box appears.
2. Select an appropriate language and click OK . The MarkWare Main Setup
Menu dialog box appears.
3. Select Install MarkWare .
4. Click Start Installation . The MarkWare Setup dialog box appears.
5. Click Next to continue. The Choose Destination Location dialog box appears.
6. Select a location and click Next to continue.
Hint! The Choose Location for the install defaults to C:\Program
Files\Brady\Markware 2.0. If you want to change the destination