Brady BradyPrinter A5500, Руководство пользователя

Страница: 53 / 72

BradyPrinter A5500 User Manual
46
Maintenance
Lubrication
Cleaning the Fan Filter
To clean the fan filter:
1. Remove (pull off) the grate from the fan located on
the back of the BradyPrinter A5500 printer.
2. Remove the filter from the grate.
3. Clean the filter by using either of these methods:
• Blow clean air through it.
• Wash it with a mild detergent and allow it to dry.
4. Replace the clean filter.
5. Snap the grate back into place over the fan.
The fan filter is a replacement part that can be ordered.
Lubrication
Some BradyPrinter A5500 printer parts will need occasional lubrication in order to keep the unit
running smoothly. It is recommended that you check the following items for proper lubrication every
6 months to a year.
Note:
These procedures require you to remove the label material and/or ribbon prior to performing
the maintenance. Remember to reload material before trying to print/flag labels.
Oiling the Slide Track
The slide track carries the print mechanism back and forth. Although it comes pre-oiled, you should
inspect it and re-oil as needed to avoid damaging the slide track.
1. On the touch screen, tap
Load Supplies
and then tap
Load Supply
.
This shuttles the print mechanism back.
2. Power off and unplug the printer.
CAUTION!
You must clean the fan filter of accumulated dust.
CAUTION!
Do not over-lubricate any of the parts. Make sure to wipe off any
excess oil or grease. Over-lubrication or lubricant in the wrong place
can result in printer malfunction.
WARNING!
Power off and unplug the BradyPrinter A5500 printer prior to
performing any cleaning or maintenance!
Filter
Grate