BradyPrinter A5500 User Manual
32
General Operation
Functions
System Configuration
The list below gives you an overview of the features and functions. To set or change any of the
following options refer to
.
•
Language:
Set the language for text on the touch screen.
•
Virtual Keyboard:
Set the language for the keyboard on the touch screen.
•
Measurement Units:
Set the unit of measure to inches or millimeters.
•
Date and Time:
Set the printer’s clock to the current date and time.
•
Advance to Next Label:
Set how the printer advances to the next label in a print file.
•
Wrapper Tension:
Turn off the tension when using delicate wires.
•
File Location:
Choose whether the printer accesses files from memory or a USB drive.
Print Adjustments
These settings will be used on all print jobs. If you want to change them just for one job, be sure to
reset to the default settings when you are done.
•
Print Energy:
Use the slider to adjust for darker or lighter printing. Print a label to test the setting.
•
Horizontal Offset:
Use the slider to shift print to the left or right on the labels. The number
shown on the slider indicates how much the beginning print position will shift relative to the
factory setting; it does
not
represent the distance from the left edge of the label.
•
Vertical Offset:
Use the slider to shift print up or down on the labels. The number shown on
the slider indicates how much the beginning print position will shift relative to the factory setting;
it does
not
represent the distance from the top edge of the label.
•
Feed to Wire:
Use the slider to adjust how much the printer peels the label before adhering on
to the wire. The zero (middle) position on the slider represents the factory setting. Adjustments
are relative to the factory setting. This is useful for braided wires because there is less contact
area to which the labels can adhere. Setting this too high can cause labels to jam.
•
Wire Diameter:
Use the slider to set the diameter of the wire being flagged. Leaving it on Auto
sets it to the lowest wire diameter for the label size installed.
•
Cycles:
Displays the number of times the printer has printed and flagged, or just flagged, a
label on a wire or cable. The cycle count cannot be edited or reset. This value is used to
determine when to perform maintenance on the printer.
To restore the factory value for any of these settings, except cycles, tap
Reset Default
.
Содержание BradyPrinter A5500
Страница 1: ...User Manual...
