Brady BP-PR PLUS Series Скачать руководство пользователя страница 49

Страница: 49 / 66

BP-PR PLUS series

Service functions

Edition 3/07

Configuration Instructions

Service functions

6.1

Performing firmware update

The firmware of the printer is saved in a Flash EPROM. You can update the firmware using the following
functions:

•

Firmware upd.

: Copy a firmware file from a computer connected to one of the interfaces of a

printer (see "6.1.1" on Page 49).

•

Firmw. fr. card

: Copy a firmware file from a memory card (see "6.1.2" on Page 49).

•

FTP firmware update via printer management (see "7.3" on Page 55).

The firmware file can be obtained on a diskette or from the internet.

6.1.1

Copying new firmware via interface

1. Press the

menu

button.

2. Select

Service

Firmware upd.

menu.

3. Press the

↵

button.

The

Firmware-Upd

message appears in the display.

4. Press the

↵

button.

5. If the function

Firmware upd.

is protected via a PIN, use the buttons

and

to enter the

code number and confirm with the

↵

button.

6. Open the DOS input window on the PC.

7. Configure the serial interface of the PC with the mode command. Enter the command

mode com1: baud=115200 parity=n data=8 stop=1

, for example

8. Send the firmware file (e.g. 303_6518.x2) to the printer. Enter the command

copy /b 304_6727.x2 com1:

, for example.

A progress indicator is displayed while the firmware is being copied.

appears in the display once

copying is successfully completed.

9. Press the

↵

button.

6.1.2

Copying new firmware from memory card

1. Format CompactFlash memory card in printer (see "8.2" on Page 57).

The directories "fonts", "images", "labels" and "misc" are created on the memory card here.

2. Copy the firmware file to the "misc" directory in a CompactFlash drive.

3. Insert the prepared memory card into the printer.

4. Press the

menu

button.

5. Select

Service

Firmw. fr. card

menu.

6. Press the

↵

button.

7. If the function

Firmw. fr. card

is protected via a PIN, use the buttons

and

to enter

the code number and confirm with the

↵

button.

The names of the firmware files found on the memory card are shown in the display.

8. If several firmware files are found on the memory card, select the desired file with the

and

but-

tons.

Содержание BP-PR PLUS Series



































































Результаты поиска

Содержание BP-PR PLUS Series

Отзывы:

Похожие инструкции для BP-PR PLUS Series

Бренды по названию

Популярные бренды

Brady BP-PR PLUS Series, Инструкции по настройке

Результаты поиска

Содержание BP-PR PLUS Series

Отзывы:

Похожие инструкции для BP-PR PLUS Series

Бренды по названию

Популярные бренды