Brady BBP31 Скачать руководство пользователя страница 64

Страница: 64 / 168

BBP™31 Sign & Label Printer User Guide

Working with Text

Reversing Text

Expanding or Condensing Text

Use this procedure to expand or condense the text characters horizontally. This
does not change the font size.

To expand or condense text:

In the

Editor

, select the text object you want to expand or condense.

In the

Control Panel

, select

More Options

to navigate to the

Expand/Condense

controls.

Select

Expand

Condense

. The text is immediately displayed

expanded or condensed on the label.

Note:

Text expands or condenses 50% to 200% in 10% increments. If the limits

are reached, the Expand/Condense buttons have no further effect.

Repeat

Step 3

to continue expanding or condensing the text.

Reversing Text

Use this procedure to format text with the foreground and background colors
reversed (i.e., black on white background or white on black background).

To set reverse text output:

In the

Editor

, select the text object you want formatted in reverse.

In the

Control Panel

, select

More Options

to navigate to the

Reverse

control.

Select

Reverse

. The text is immediately displayed with the foreground

and background colors reversed.

To toggle the setting on or off, select

Reverse

again.

Содержание BBP31








































































































































































Результаты поиска

Содержание BBP31

Отзывы:

Похожие инструкции для BBP31

Бренды по названию

Популярные бренды

Brady BBP31, Руководство пользователя

Результаты поиска

Содержание BBP31

Отзывы:

Похожие инструкции для BBP31

Бренды по названию

Популярные бренды