MF2944 - TouchTime
®
Activation
Installation
6
7/10/2019
Bradley •
215-1539 Rev. K; ECO 19-00-022
A
Attach the stops to hot and cold water rough-ins .
B
Connect one end of each supply hose to the stops .
C
Inside the pedestal, install the two 1/4" - 20 x
1/2" screws (supplied with valve assembly) in the
mounting holes on the side of the left pedestal panel .
Do not thread the screw completely into the panel,
but allow
5
/16" of the screw to be exposed .
D
Connect the other end of each supply hose to the
Navigator
®
TMV valve assembly (one on the hot side,
one of the cold side) .
E
Mount the valve bracket and module assembly to
the left side of the pedestal .
F
For optional single tempered supply: attach the
stop to the 1/2" tempered supply line . Connect
the stop to the solenoid valve assembly with the
flexible supply hose .
Install Solenoid Assembly
4
The letter "H" on the Navigator
®
mixing valve
indicates hot water supply inlet.
1/4" - 20 x 1/2"
Mounting Screws
Module
Assembly
Valve Assembly
(TMV Shown -
TL Similar)
Supply Hose
Stop
Cold Supply
Inlet
Hot Supply
Inlet
Pedestal Panel
Cables not shown for clarity.
