6951 Series
Installation
6
9/10/2019
Bradley
• 215-737 Rev. G: ECO 19-00-028
1 . Install suitable wall anchors for 1/4" bolts at the dimensions
shown in the rough-in drawings (anchors and bolts supplied
by installer) .
• 2- and 3-station sinks require 10 wall anchors and bolts .
• 4-station sink requires 13 wall anchors and bolts .
• 5-station sink requires 16 wall anchors and bolts .
2 . Use a carpenter’s level to make sure all of the brackets are
level with the floor and with each other before securing them
to the wall . An improperly installed bracket could result in a
sink that is not level .
3 . Mount the support brackets to the wall anchors with 1/4" bolts
(supplied by installer) .
• 2- and 3-station sinks require two brackets and six bolts .
• 4-station sink requires three brackets and nine bolts .
• 5-station sink requires four brackets and twelve bolts .
4 . Hang the wall sink onto the support brackets .
Make the connection to the pipe (supplied by the installer)
AFTER the sink legs have been installed.
1 . Use plumbers putty to caulk the drain spud .
2 . Insert the drain spud into the hole in the wall sink and secure the
spud to the sink with the washer and locknut provided as shown .
3 . Attach the strainer to the drain spud and secure with the two
screws provided .
4 . Insert the flanged plastic washer into the top of the tailpiece .
Slide the tailpiece nut up to the top of the tailpiece and screw the
nut into the spud to secure the tailpiece to the sink .
Mount Sink to Wall
1
Assemble Drain
2
