SS-3N/BIR3/STD, SS-3N/BIR3/WH
Installation
8
9/7/2018
Bradley
• 215-1496 Rev. J; ECN 17-08-026
45
45
45
The letter “H” on the Navigator
Mixing Valve indicates hot water
supply inlet.
4a Connect the Supply - Hot and Cold Supply
C
Connect one end of each hose to the
Navigator valve (one on the hot side,
one on the cold side).
Connect the other swivel end to the
stop valves.
A
Loosen but do not remove the
two mounting screws holding the
valve bracket to the frame.
Slide the valve bracket up and
lift it from the frame.
B
Attach the stops to the hot and cold
water wall stub-outs.
45
45
C
Connect one end of flexible hose
to the tempered line adapter.
Connect the other swivel end to
the stop valve.
4b Connect the Supply - Single Tempered Supply
A
Loosen but do not remove the
two mounting screws holding the
valve bracket to the frame.
Slide the valve bracket up and
lift it from the frame.
B
Attach the stop to the tempered wall
stub-out.
