Bradley 8170-158 Скачать руководство пользователя страница 1

P.O. Box 309, Menomonee Falls, WI  USA  53052-0309
PHONE 800.BRADLEY (800.272.3539)  FAX 262.251.5817

bradleycorp.com

Installation 

P20-125 Rev. A; ECN 13-15-016

© 2013 Bradley

Page 1 of 5 

8/7/2013

8170-158, 8170-1581

Swing-Away Grab Bar

Table of Contents

Supplies Required  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2
Dimensions   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2
Installation  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3-4
Operation .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4
Grab Bar Maintenance   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4
Cleaning and Maintenance of Stainless Steel .  .  .  .  .  .  .  .  .  . 5

IMPORTANT!

Read this entire installation manual to ensure proper installation, then file this manual with the 
owner or maintenance department. Compliance and conformity to local codes and ordinances is 
the responsibility of the installer.

Separate parts from packaging and make sure all parts are accounted for before discarding 
any packaging material. If any parts are missing, do not begin installation until you obtain the 
missing parts.

Product warranties and other information may be found under "Products" on our website at 
www.bradleycorp.com.

Installation

THIS

SIDE

UP

Packing List

Model 8170-158 shown

Содержание 8170-158






Отзывы: