817, 837 & 857 Series
Installation
2
3/20/2018
Bradley •
500-377 Rev. A; ECN 18-15-009
Installation
Verify all rough-in dimensions prior to installation.
WARNING Wall must be reinforced in the area of the grab bar in order to support the load it is
intended to support.
1. Using the bar as a template, mark the mounting hole location onto the wall.
2. Drill holes and set anchors as appropriate.
3. Mount grab bar and secure mounting screws (supplied by installer).
For more information on Bradley's grab bar mounting kits, please visit www.bradleycorp.com
Mounting Flange Dimensions
3-1/4"
(80mm)
2-1/2"
(60mm)
* 1-1/2" wall clearance required
under most building design codes
* 1-1/2"
(38mm)
1/8"
(3mm)
3-1/8"
(79mm)
exposed
