1
2
2
3
4
5
6
7
8
12
9
10
11
13
Z
150
WITH AS SMALL
A BEAD AS
POSSIBLE.
WHERE ALL PROFILES
MEET THE TRAY.
BI-FOLD ENCLOSURE INSTRUCTION (EXTERNAL WALL PROFILE)
9
WE RECOMMEND THAT THE INSTALLATION OF THIS PRODUCT IS CARRIED
OUT BY A COMPETENT PROFESSIONAL.
UNPACK THE BOX AND ENSURE ALL COMPONENTS ARE PRESENT.
NO REFUNDS OR REFITTING COST WILL BE GIVEN IF INCOMPLETE OR
DAMAGED GOODS ARE FITTED.
THE TOUGHENED SAFETY GLASS SHOULD BE HANDLED WITH CARE AS
IMPACTS WILL DAMAGE THE GLASS OR ENCLOSURE.
FIT THE SHOWER TRAY AS PER THE MANUFACTURER'S INSTRUCTIONS.
NOTE:
IF THE TRAY ISN'T TRUE AND LEVEL, IT MUST BE RECTIFIED BEFORE
SILICONING AROUND THE TOP EDGE OF THE TRAY WHERE IT MEETS THE
TILES. ALLOW SILICONE TO DRY BEFORE FITTING THE ENCLOSURE.
TOOLS REQUIRED
POWER DRILL - 3mm DRILL BIT - 6mm MASONARY DRILL BIT - CROSS
HEAD SCREW DRIVER - TAPE MEASURE - PENCIL - SILICONE GUN WITH
SANITARY GRADE SEALANT - SPIRIT LEVEL.
EXTERNALLY SILICONE SEAL THE WALL PROFILES WHERE THEY MEET THE WALL AND THE BOTTOM PROFILE
WHERE IT MEETS THE TRAY. ALL IN A CONTINUOUS BEAD.
ALSO SILICONE SEAL WHERE THE TOP & BOTTOM TRACKS MEET THE DOOR SUB ASSEMBLY VERTICAL
PROFILES. AS SHOWN IN THE DETAILED VIEW BELOW.
DO NOT SILICONE INSIDE THE ENCLOSURE.
ALLOW THE SILICONE AT LEAST 24 HOURS TO FULLY CURE.
AFTERCARE -
ENSURE YOU CLEAN YOUR PRODUCT USING A MILD DETERGENT DILUTED IN WATER, REMOVING ANY RESIDUE WITH A
SOFT DAMP CLOTH.
MAINTENANCE -
ENSURE MOVING PARTS ARE FREE FROM ANY DEBRIS OR SOAP BUILD UP.
SHOWER ENCLOSURE WITH WHEELS -
THE WHEELS MUST ROTATE FREELY AND THE SPRING LOADED MECHANISM IN THE BOTTOM
WHEELS MUST OPERATE WITHOUT INTERFERENCE.
TROUBLE SHOOTING GUIDE
IS THE TRAY LEVEL? (SEE STEP 1).
1.
DOES THE DOOR RUN FREELY AND SMOOTHLY WITHOUT RESISTANCE? (SEE STEP 6).
2.
DO THE FINISHED TRAY MEASUREMENTS COMPLY WITH THE ADJUSTMENTS LISTED IN THE PRODUCT
3.
SPECIFICATION?
WHEN CONSIDERING THE LENGTH OF THE TOP TRACK ALSO CONSIDER THE VERTICAL PROFILES THAT ARE
4.
SECURED TO IT WHICH INCREASE ITS LENGTH.
WHERE THE DOOR
SUB ASSEMBLY
PROFILE MEETS THE
WALL PROFILE.
