Electronic Dispenser
Installation
2
5/11/2020
Bradley •
P20-227 Rev. A: ECO 19-15-030A
Supplies Required
• Included hardware kit or hardware suitable
for mounting surface
• Mounting template (provided)
• Level
• Pencil
• Drill with an appropriate drill bit for wall
surface and hardware
• Phillips screwdriver
• Approved eye protection
• (4) D Batteries
Locate Mounting Position
1
Insert Fastener Anchors
4
Insert fastener anchors into the wall, if needed.
Attach Dispenser
5
With the dispenser in the open position, use
the supplied hardware (or suitable hardware)
to mount the dispenser securely into place.
Be sure to use the appropriate fastener anchors
and hardware for the surface.
Use the level to ensure the dispenser is
balanced.
Use the key to open the dispenser and hold
the dispenser in the desired location.
Mark Mounting Holes
2
Using the provided mounting template, place a
level across the top of the mounting template
to level the dispenser, and mark a minimum of
4 mounting hole locations on the wall.
Drill Mounting Holes
3
Using a drill with the appropriate drill bit,
drill the holes into the wall or surface.
Mounting Template
Optional 110/120V
Power Supply Location
(A16-013)
4"
6¾"
