Bradbury Equipment H4441, Руководство по установке

Страница: 6 / 29

T70729
Revision:
5
BRADBURY WHEEL-FREE
ENGLISH
5.
Level platforms and cross beams and measure the diagonals.
Note: The requirements of the local authorities concerning installation of lifts must always be respected.
(Rules valid in Scandinavia: distance to walls: min. 0.7 m, distance between lifts and other machines: min. 1.1 m).
6.
Place cable pulleys, distance washers, axles and grease nipples. NOTE: Lubricate the bearing bush in the
cable pulley before fitting the axle.
7.
The switches S11, S12 and S14 are to be placed loosely at the two wheel-free cross beams as shown. See
picture page 2 for correct positioning of the switches . Fixation /adjustment of the switches is made at step
39.
Lead cables through cross beams (use nipples
– bag 16) and through the Ø30 hole on the outer side of cross
beam.
8.
Place the 2 wheel-free cross beams on the main cross beams. Make sure that the outer sides of the main
cross beams and the wheel-free cross beams flush.