BRABUS 1300 R, Инструкции по установке, Страница: 6 / 23

2 SETUP
4
S05295-10
–
Remove the handlebar clamp screws
3
.
–
Take off the handlebar clamp.
S05296-10
–
Position the handlebar.
The markings of the handlebar scale are located centrally
between the handlebar clamp.
–
Position the handlebar clamp. Mount and tighten the screws
evenly.
Guideline
Screw, handlebar
clamp M8 20 Nm (14.8 lbf ft)
S05297-10
–
Position the combination instrument rack on the handlebar.
–
Mount screw
4
, but do not tighten it yet.
–
Move the combination instrument into the desired position.
–
Tighten screw
4
.
Guideline
Screw, combination
instrument clamping M6 2 Nm (1.5 lbf ft)
–
Plug in connector
5
with sleeve.
S05298-10
–
Mount and tighten the rear mirror on both sides.
Guideline
Screw, handlebar
end mirror M6x35 13 Nm (9.6 lbf ft)
Mount the rear mirror facing downward.
H05199-01
–
Carefully loosen and remove the tension belts around the fork
legs.
The vehicle is released at the front.
Info
An assistant prevents the motorcycle from falling over.
–
Remove the tension belt on the rear wheel.
–
Together with an assistant, take the vehicle off the pallet.
–
Remove the radiator shield.