BRABUS 1300 R, Инструкции по установке, Страница: 5 / 23

SETUP 2
3
2.1 Transport mode
H02713-01
This vehicle was blocked for transport in the software.
To operate the vehicle, the vehicle electronics must be enabled.
This process is conducted during initial setup in KTM Dealer.net.
Enabling ensures that the initial setup in KTM Dealer.net is docu-
mented.
Enabling can be performed either temporarily, e.g. for a test ride,
or permanently for vehicle handover.
Info
Make sure that the vehicle is permanently enabled before
handing it over to the customer.
2.2 Diagnostics connector
H01949-01
The diagnostics connector is located under the front rider's seat.
2.3 Unpacking and setting up the vehicle
Preliminary work
–
Remove the box.
H05199-01
Main work
–
Remove the separate enclosure and unpack it. Check that the
scope of supply is complete using the enclosed packing list.
Info
The procedure for missing components is described in
the Customer Service Manual.
–
Check the vehicle for transport damage.
Info
The procedure in the event of transport damage is
described in the Customer Service Manual.
S05294-10
–
Remove cable ties
1
and hang the combination instrument
to the side.
–
Remove cable ties
2
and hang the handlebar to the side.