7
HDSDI out
This is a 3Gb link via the slip rings from the
HDSDI in
connector at the top
of the unit.
Genlock in
Connects directly to the
Genlock out
connector at the top of the unit.
HDSDI Fibre
If fitted this is an ST connector and carries the HDSDI picture output from
the camera. The camera is connected to the
HDSDI in
connector at the
top of the unit.
Data Fibre
If fitted this is an ST connector and carries the same bi-directional data as
the
Dsub9
and also
Dstar
Protocol. To use the data on this fib
re a ‘
Base
Statio
n’ is required to decode the fibre signals. This presents the signals
on the same electrical connectors as above.
Camera Power
4pin XLR supplies 12v @3A for powering cameras.
RJ45 Loop
If an IP adaptor is not fitted this is a direct loop from the RJ45 socket on the
base.
CCU
This is a 7pin Lemo socket which can handle bi-directional RS422 camera
CCU data and other formats. Various camera protocols are built-in. This
means that many makes of camera can be controlled via data embedded
within the movement control data (
Ikegami, Sony, Hitachi, Panasonic,
JVC
and others on request).
Spare
A spare connector position is provided on the back. This can be fitted with
a connector and used for external functions; an external Tally Light, for
example.
