BPC T-3100P, Руководство пользователя

Страница: 28 / 41

24
4.7 When Utility Power Is Interrupted
When there is a utility power interrupted, the L6 inverter led continuously lit also L3 battery and on the LCD
“A10 LINE FAILURE” message appears. And also an audible alarm sounds. Your UPS continues to convert
the battery voltage to AC voltage and protect against loss of data and failure. The autonomy can be increased
by disconnecting relatively unimportant loads. But do not connect this load again while the autonomy. When the
utility power is restored the UPS will return to normal operation and on the front panel of the UPS
“A45 MAINS
OK” mesage appears.
When there is a “ A7 BATTERY LOW ” message appears and audible alarm sounds shut down your PC. If not all
the batteries will be discharge in a few minutes.
After you shut down the critical load (computer system). Apply the completely powering down the UPS.
Apply the normal operation procedure to start up the UPS again after a long time later.
NOTE: Do not forget to turn on the battery circuit breaker into “1” (ON) position when there is a mains
voltage return. If not, in case of a second power cut there will be no voltage for the critical load.
If you have a reserve generator, you can use it to feed the UPS’s input and the batteries starts to
charge. By using UPS and the generator at the same time ensures to charge the batteries faster.