• Make sure to unclip the tone arm lock before use and to secure it again after
use.
Playing a record
1. Open the dust cover and turn the volume knob clockwise to turn the equipment
on.
2. Use the function selector to select PHONO mode.
3. Set the speed selector to the appropriate position: 33, 45 or 78, depending on
the record to be played.
4. Set the auto stop control to ON if you want the turntable to stop turning when it
has reached the end of the record. If the switch is set to OFF, the turntable will
continue turning at the end of the record.
5. Place the record on the turntable (use the 45 rpm adaptor, if required).
6. Move the lift lever towards the back to raise the tone arm from the arm park,
then slowly move the arm to the record, as illustrated on the right. The
turntable will start rotating.
7. Move the lift lever towards the front, the tone arm will gently drop onto the
record and playback will start.
8. To stop playback, move the lift lever towards the back to raise the tone arm.
The turntable will still be rotating but the record will stop playing. To continue
playback, move the lift lever towards the front.
9. To play a different piece on the record, move the lift lever towards the back,
