hazard. Contact the after sales support line for advice.
• CAUTION
: To reduce the risk of fire or electric shock, do not expose this
equipment, the power supply cord and plug to rain or moisture; do not use it
anywhere near water or where water splashes or drips; do not touch the power
2
plug with wet hands. In the event that water or other liquids enter the device,
unplug the unit immediately and clean and dry it as best as possible. Then have
it checked for damage by a qualified technician. Contact the after sales support
line for advice.
• Do not repair the unit yourself. Only have it serviced by qualified personnel.
Contact the after sales support line for advice.
• Unplug the unit from the power outlet after use to avoid possible damage during
electrical storms, or when the equipment will be unattended or unused for a
long period of time.
• Do not let the cord hang over the edge of a table or counter, or touch any hot
surface. Do not allow anything to rest on or roll over the power cord, and run
any cords so that no one steps on or trips over them.
• Do not run the cord near heat-producing appliances such as radiators, stoves or
irons. The excessive heat could melt the insulation and expose live wires.
• Always grasp the plug, not the cord, when disconnecting the unit. Pulling the
cord can damage the internal wires and may cause a fire.
Installation
• When installing the unit, make sure to place it: