Boyo VTR107, Руководство пользователя

Страница: 18 / 20

2) Setting the “Voice Record”
▷
ON / OFF the Voice Record ( default : ON )
3) Setting the “Security LED”
▷
ON / OFF the Security LED ( default : ON )
4) Setting the “Buzzer”
▷
ON / OFF the Buzzer ( default : ON )
5) Setting the “G-Sensor Sensitivity”
▷
Control the sensitivity of G-sensor ( default : 8 steps )
6)Time Zone
●
ATTENTION
- In case of the device WITH GPS , you should use [Time Zone] to set your local time if
you are outside Korea. Default of device is GMT +09:00 (Korea).
- In case of device WITHOUT GPS, you should use [Time Setting] to set your local time.
1. To set the time zone, you should use the device at least once. Insert microSD card
into the device and turn it on. After completing the booting, turn off the device.
2. Take out microSD card from the device and insert it into the computer.
3. Run PC Viewer. Click [OPEN] and choose the drive of microSD card. Then, Files are
listing at right side of screen.
4. Go to Setting

Time Zone

choose your GMT time zone and click [OK]
5. Take out microSD card from the computer and insert it into the device. Turn on the
device, and the new time zone is automatically setting by GPS.
7) Applying the each setting value
▷
After setting up each
condition, click “OK” to save the values in microSD card.
▷
The new values are stored into
“setup.cfg” file in “setting” folder of micro SD card.
▷
After inserting the microSD card into the device, turn it on. The new values are adjusted.
♦ When “setup.cfg” file of microSD card is deleted by force, be sure to insert it into
the device and turn it on.
“setup.cfg” file is automatically generated with default
value.