10.Reset Setting
Press “ ” on the panel or“VIDEO” “MODE”on remote control to
switch to“Others”option, and then press “ ” on the panel or“LEFT”
“RIGHT”on remote control to enter into “Others” selection. Press “ ”
on the panel
or “VIDEO” “MODE”on remote control again to switch to“Reset”
option,and then
press “ ” on the panel or“LEFT” “RIGHT”on remote
control to confirm the
reset setting. Press “MENU” to exit the current setting.
Just as shown in the following pictures.
C.Connection
1.Monitor
2.Camera
3.Camera Pairing button
4.Camera power supply port: DC12-24V input
5.Monitor power supply port: DC12-24V input
6.Reversing trigger line
9.Wireless signal channel setting
Press “ ” on the panel or“VIDEO” “MODE”on remote control to switch to
“Others”option, and then press “ ” on the panel or“LEFT” “RIGHT”on remote
control to enter into “Others” selection. Press“ ”on the panel or“VIDEO” “MODE”
on the remote again to switch to “Channel” selection. Press“ ” on the panel or
“LEFT” “RIGHT”on remote control to set the wireless signal channel frequency.
The default state is CH1 channel. There are 14PCS wireless signal channel optional
(2412
〜
2484MHZ
).
If
there
is several monitors work on the same frequency, may
have signal unstable or image flicker problem, which could be improved by changing
the frequency. Press “MENU” to exit the current
setting.
Just as shown in the following
pictures.
8.Parking guide line switch setting
Press “ ” on the panel or“VIDEO” “MODE”on remote control to switch to
“Others”option, and then press“ ” on the panel or“LEFT” “RIGHT”on
remote control to enter into “Others” selection and press “ ” on the panel
or“VIDEO” “MODE”on remote control again to switch to the PGL selection, press
“ ” on the panel or“LEFT” “RIGHT”on remote control to open or close it .
The default state is closed. Press “MENU”
to exit the current setting.
Just as
shown in the following pictures.
Содержание VTC702R
Страница 1: ...VTC702R...
