Camera Introduction
1
2
4
3
1.2.4G antenna
2.U shaped bracket and sun shade
3.Power cable: DC 12-24V input
4.Pairing button
B.Menu Setup Introduction
2.
Camera brightness Setting
Press “ ” on the panel or “VIDEO” “MODE”on remote control to switch
to“Brightness”option, and then press “ ” on the panel or “LEFT”
“RIGHT”on remote control to enter into the camera brightness setting and
press them again to adjust the specific parameters. Press “MENU” to confirm
the adjusted parameter and press it again to exit the current setting. Just as
shown in the following pictures.
3.Camera contrast Setting
Press “ ” on the panel or “VIDEO” “MODE”on remote control to switch
to“Contrast”option, and then press “ ”on the panel or “LEFT” “RIGHT”
on remote control to enter into the camera contrast setting and press them
again to adjust the specific parameters. Press “MENU” to confirm the adjusted
parameter and press it again to exit the current setting. Just as shown in the
following pictures.
1. Pairing setting
Press the “MENU” key on the panel or remote control to open the menu interface;
then press “ ” on the panel or “VIDEO” “MODE”on remote control to switch
to the “Pairing” option; and then press “ ” on the panel or “LEFT” “RIGHT”
on remote control, at the same time, hold the camera pairing button to pair. There
will show “Pair OK” after 2-5 seconds if pair successfully, otherwise will show
“Pair fail” and need to re-pair. Press “MENU” to exit current setting. Just as shown
in the following pictures.
Содержание VTC702R
Страница 1: ...VTC702R...
