14
Operation Guide
1.
Long press the power button to turn on/o the transmitter and the receiver.
2.
Pairing
Before leaving factory, the system is pre-paired. Therefore, the connection will be
established once they are powered on. If they are disconnected, please follow below
steps:
1)
Long press the SET button to enter menu screen
2)
Use the + or -button to display the Connect setting menu on both transmitter and
receiver.
3)
Long press the SET button to select the menu
4)
Select Yes, and long press the SET button to confirm.
5)
Transmitter and receiver will be succesfully paired within 10s
3.
Connect the receiver to the mic input of a camera, recorder or mixer with the
supplied 3.5mm TRS cable. Or connect the RX to a smartphone, tablet, or computer
with the supplied 3.5mm TRS to TRRS cable.
4.
You are ready to record.
