#
Item
Description
1
Omni
-
directional
microphone
Picks up sound. The sound enters through the holes in
the top of the capsule.
2
Power pack
Provides power for the microphone for use with cameras
and other devices requiring a powered mic.
3
Camera setting
Turns power on to the microphone. For use with
cameras and other devices requiring a powered mic.
4
OFF/Smartphone
setting
Turns the power off to the microphone. For use with
Smartphones and other devices requiring an unpowered
mic.
Note: Keep the device on this mode when not in use to
save the battery.
5
3.5 mm connector
Connects the microphone to the Smartphone, camera,
camcorder, or other recording device.
Using the microphone
Attaching the microphone to the clothing clip
•
Insert the microphone into the plastic loop on the clothing clip.
Notes:
•
Attach the microphone upside down to reduce excessive breath noises and tonal
inconsistencies due to head movements.
•
It is recommended that you always use the foam wind screen to avoid wind noise, even
when recording inside.
Mounting the microphone to your clothing
•
Attach the microphone to the front of your clothing with the clothing clip, about
six inches (15-20 cm) from your face.
Notes:
•
Tape a loose loop of the microphone cord to the inside of your clothing. This provides
additional strain relief for the microphone cord and isolation from unwanted noise.
•
Before recording an important event, record and play back a short test clip with the
microphone attached to ensure audio recording is functioning properly.
