BOXSTUDIO AH8201, Руководство пользователя

Страница: 35 / 52

4.5.7.7 Settings
→
Live Setting
→
TS Stream
Figure 48 TS Stream
As shown in Figure 48, the recorder supports TS unicast and multicast streaming. TS streaming only support to
watch live in the LAN.It is no need to install RTMP streaming media server software on the local PC and only use
the commonly player which can support network streaming viewing (such as VLC, Storm, Thunder player, etc.).
Entering the fixed Format address to view broadcasting from the recorders under LAN.
TS Unicast uses the TCP network protocol, and the user requests to start pushing the video live stream.
Operation method: 1, check the need to push the code stream (the main stream or sub-stream); 2, set port no.; 3,
return to the main interface, click the button in the PGM channel
to start streaming; 4, open the network player in the network to enter a fixed format "tcp: / / recorder IP:
Streaming port" to open and watch the live screen.
TS multicast using UDP network protocol, no user request (open the player to watch), just tick the
corresponding code stream and port number, click the TS button to open the real-time streaming. The setting of
UDP is the same as the above Unicast, and the multicast address is the default multicast address: 239.0.0.2.
Open the network stream in the player and input fixed format "rtp: //239.0.0.2: stream port no." and watch
the live video.
Note: The difference between multicast and unicast: Unicast is a request to start steaming by user. The user's
player is connected to recorder, so unicast support a limited number of live viewing at the same time. Multicast
use must be in the local area network environment of the router, the general router default multicast IP is
239.0.0.2.Set up multicast stream, the recorder will always push the video stream to the multicast address. The
user connect to a multicast address and obtain a video stream. Multicast supports 253 clients to view live
broadcasts simultaneously.