BOXLIGHT Cinema 12SF, Руководство пользователя

Страница: 18 / 83

8
S e t t i n g u p t h e P r o j e c t o r
NOTE: If you have turned Auto
Source off (page 45), you may
need to press the source button
more than once to display an
active source. The sources switch
in this order: PC 1-Analog,
PC 1-Digital, Video 3-Component
HDTV, Video 3-Component, Video
1 S-Video, Video 2-Composite, PC
2-Component, and PC 2-Analog.
The module connects to the projector via the projector’s com-
puter connector. Slide the tabs in the module into the grooves on
the back of the projector, then press the computer connector into
the projector. To remove the module, press down all the way on
the textured lever on the top left of the module to release the
latch, then slide the module off.
F
IGURE
9
Connecting the connectivity module to the projector
The module provides two computer and three video inputs (see
page 63 for a list of sources and audio/video connectors). The
module also provides monitor out (used to display images on
your desktop computer’s monitor as well as on the projection
screen), and RS-232 input (to control the projector from an LCD
control panel).
NOTE: Monitor out is only
available for analog computer,
480p, and HDTV sources.