26
Installing the door
-
Remove the protecting film from both sides of the door panel. Mount the 2 hinges on the door
with M5x16 inbus screws. Use M5 washers and M5 nuts to secure the hinges.
Note: make sure
the door is not upside down. Hold the door in front of box3d to check if the hole for the
magnet is aligned. If not, flip the door.
o
2x hinge
o
4x M5x16 inbus screw
o
4x M5 washer
o
4x M5 Nut
o
1x door panel
+
