BOWHEAD REACH Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 38

BOWHEAD REACH Скачать руководство пользователя страница 32

32 |

P a g e

5.

If needed, align the handlebar and stem, and torque the stem clamp bolts evenly.

Be

sure to torque the stem clamp bolts evenly to the specification listed in

“Tools and

recommended torque values”

on page 10. After torquing the stem clamp bolts to the proper

specification, perform the twist test again. If the handlebar still moves, contact Bowhead
Customer Support.

WARNING

If you are not sure you have the experience, skills, and tools to correctly perform all steps
to secure and verify the security of the handlebar, front wheel, and handlebar stem you
MUST consult a certified, reputable bike mechanic to check your work and/or secure those
components to the bike properly.

Safety

We strongly advise you to strictly follow the recommended maintenance program outlined in
your owner's manual.

SAFE RIDING GEAR

Always wear a helmet, eye protection, gloves, long-sleeve shirt, long pants, over-the-ankle
socks and elbow pads at all times. Protective gear reduces the chance of injury.

OPERATOR SAFETY

WARNING

Serious injury or death can result if you do not follow these instructions and procedures.

Read this entire manual and all labels carefully. Follow the operating procedures described.

• Never allow anyone under the age of 16 to operate this

bike.

• The

rider must wear helmet, eye protection, gloves, long-sleeve shirt, long pants, over-the-

ankle socks and lap belt at all times.

• Always keep both hands on the

handlebar and both feet strapped during operation.

• Never permit a guest to operate this vehicle unless the guest has read this manual and all

product labels.

• This vehicle is for off

road use only. Never operate on public roads (unless marked for off-

road use).

• Never consume alcohol or drugs before or while operating this vehicle.

• Never operate at excessive speeds. Always travel at a speed proper for the terrain, visibility

and operating conditions, and your experience.

• Never attempt jumps or other stunts.

«
...
30
31
32
33
34
...
»

Содержание REACH







































Отзывы:

Нет отзывов