manualshive.com logo in svg

Bowflex Treadmill 22, Руководство по обслуживанию

Поделиться
Скачать
Bowflex Treadmill 22 Скачать руководство пользователя страница 35

35

1. Unplug the power cord from the machine and wait 5 minutes. Place the 

power cord in a secure location.

!

To reduce the risk of electrical shock or unsu-

pervised usage of the equipment, always unplug 

the power cord from the wall outlet and wait 5 

minutes before cleaning, maintaining or repair-

ing this machine. Place the power cord in a 

secure location.

2. Using a #2 Phillips screwdriver, remove the 5 screws (indicated by ar

-

rows) that secure the Motor Cover and remove it.

of the machine (see image to the right).

3. Gently release the front snaps (indicated by ovals) that secure the 

Motor Cover and pivot it back toward the walking belt until it releases. 

Remove from the machine.

Note:

 Your machine may not match the images provided exactly.

Motor Cover

Motor Cover

Motor Control Board (MCB)

Incline Motor Assembly

Содержание Treadmill 22












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды