Walking
Walking
Walking Belt
Belt
Belt Adjustment
Adjustment
Adjustment
If either of the walking belts track too much to one side, adjustments can be made at the Front Roller
of each Treadle.
Belt
Belt
Belt Alignment
Alignment
Alignment Check
Check
Check – Stand adjacent to the unit and set the speed to 1.5 MPH. The alignment adjustment
bolts are on the front end of each Roller. If the belt is tracking too far to the right, use the provided Hex Key
to turn the right adjustment bolt clockwise on that belt in full turn increments. If the belt tracks too far to
the left, do the same thing on the left adjustment bolt.
Note:
Note:
Note: Do not turn the bolts counterclockwise when you adjust the belt alignment.
Belt
Belt
Belt Tension
Tension
Tension Check
Check
Check – Correct belt tension should only allow a finger to fit snugly below the belt’s midpoint.
Carefully slide a finger under the belt to test it when the machine is unplugged. If the belt is loose, turn
both bolts clockwise one full turn and check tension again. Repeat this step if necessary.
Note:
Note:
Note: Bolts are turned counterclockwise to decrease belt tension.
A
Adjustment Bolts
18
18
18
