background image

Assembly / Owner’s Manual

6

Before Assembly 

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow 

a workout area of a minimum 139.2 cm (54.8 in) x 182.6 cm (71.9 in). Keep the workout area clear 0.6 m (24 in) along the side used to access the 

machine and to the rear of the machine. Be sure that the workout space you are utilizing has adequate height clearance, taking into consideration 

the height of the user and the maximum pedal height of the fi tness machine.

Basic Assembly Tips

Follow these basic points when you assemble your machine:

•  Read and understand the “Important Safety Instructions” before as-

sembly.

•  Collect all the pieces necessary for each assembly step.
•  Using the recommended wrenches, turn the bolts and nuts to the right 

(clockwise) to tighten, and the left (counterclockwise) to loosen, unless 

instructed otherwise.

•  When attaching 2 pieces, lightly lift and look through the bolt holes to 

help insert the bolt through the holes.

•  The assembly requires 2 people.

Machine Mat

The Bowfl ex™ Max Trainer™ Machine Mat is an optional accessory that helps keep your workout area clear and adds a layer of protection to your 

fl oor. The rubber machine mat provides a non-slip, rubber surface which limits static discharge and reduces the possibility of display errors. If pos-

sible, put your Bowfl ex™ Max Trainer™ Machine Mat in your selected workout area before you begin assembly.

To order the optional machine mat, contact Customer Service (if purchased in US/Canada) or your local distributor (if purchased outside US/

Canada).

Specifications / Before Assembly

Maximum User Weight: 

  136 kg ( 300 lbs.)

Total Surface Area (footprint) of equipment:

 9648.8 cm

2

Maximum Pedal Height: 

  48.5 cm ( 19.1 inches ) 

Machine Weight: 

  

64 kg (141 lbs.)

Power Requirements: 

  Input Voltage:    

100-240V AC, 50-60Hz, 0.5A

  Output Voltage:  

9V DC, 1.5A

DO NOT dispose of this product as refuse. This product is to be recycled. For 

proper disposal of this product, please follow the prescribed methods at an 

approved waste center. 

165.6 cm

(65.2”)

121.5 cm

(47.9”)

78.2 cm
(30.8”)

1.8 m (71.9”)

1.4 m

   (54.8”)

0.6 m

( 24” )

0.6 m

( 24” )

Содержание Max Trainer M8


















Отзывы: