Bowflex MAX Trainer M7i, Руководство владельца/по сборке

Страница: 46 / 60

Assembly / Owner’s Manual
46
Condition/Problem Things to Check Solution
No display/partial display/unit
will not turn on &KHFNHOHFWULFDOZDOORXWOHW Make sure unit is plugged into a functioning wall outlet.
Check connection at front of unit Connection should be secure and undamaged. Replace adapter or connec
tion at unit if either are damaged.
Check data cable
connections/orientation Be sure cable is connected securely and oriented properly. Small latch on
connector should line up and snap into place.
Check data cable integrity All wires in cable should be intact. If any are visibly crimped or cut, replace
cable.
Check console display for
damage Check for visual sign that console display is cracked or otherwise damaged.
Replace Console if damaged.
AC Adapter Check for visual sign that AC Adapter is cracked or otherwise damaged.
Replace AC Adapter if damaged.
Console Display ,I&RQVROHRQO\KDVSDUWLDOGLVSOD\DQGDOOFRQQHFWLRQVDUH¿QHUHSODFHWKH
Console.
If the above steps do not resolve the problem, contact your local distributor
for further assistance.
No response on Console when
button is pushed Console Button Assembly Try other buttons to get any response on the Console.
Check data cable integrity from
Console Button Assembly to
Console All wires in cable should be intact. If any are visibly crimped or cut, replace
cable.
Check data cable
connections/orientation Be sure cable is connected securely and oriented properly. Small latch on
connector should line up and snap into place.
Check console display for
damage Check for visual sign that console display is cracked or otherwise damaged.
Replace Console if damaged.
Check Console Button As
sembly
Check for visual sign that the Console Button Assembly is otherwise dam
aged. Replace the Console Button Assembly if damaged.
If the above steps do not resolve the problem, contact your local distributor
for further assistance.
No speed/RPM reading Check data cable integrity All wires in cable should be intact. If any are cut or crimped, replace cable.
Check data cable
connections/orientation Be sure cable is connected securely and oriented properly. Small latch on
connector should line up and snap into place.
&KHFNPDJQHWSRVLWLRQUHTXLUHV
VKURXGUHPRYDO Magnet should be in place on pulley.
&KHFN6SHHG6HQVRUUHTXLUHV
VKURXGUHPRYDO Speed sensor should be aligned with magnet and connected to data cable.
Realign sensor if necessary. Replace if there is any damage to the sensor or
the connecting wire.
Console Electronics If tests reveal no other issues, contact your local distributor.
Unit operates but Telemetric HR
not displayed Chest Strap Strap should be “POLAR
®
´FRPSDWLEOHDQGXQFRGHG0DNHVXUHVWUDSLV
directly against skin and contact area is wet.
Interference
7U\PRYLQJXQLWDZD\IURPVRXUFHVRILQWHUIHUHQFH790LFURZDYHHWF
Replace Chest Strap If interference is eliminated and HR does not function, replace strap.
Troubleshooting