Bowflex BXE216, Инструкция по сборке и эксплуатации

Страница: 51 / 64

Assembly / Owner’s Manual
51
&RQGLWLRQ3UREOHP Things to Check Solution
5HVLVWDQFHGRHVQRWFKDQJH
(machine turns on and oper-
ates)
Check Console &KHFNIRUYLVXDOVLJQWKDW&RQVROHLVGDPDJHG5HSODFH&RQVROHLIGDPDJHG
Check data cable integrity $OOZLUHVLQFDEOHVKRXOGEHLQWDFW,IDQ\DUHYLVLEO\FULPSHGRUFXWUHSODFH
cable.
&KHFNGDWDFDEOHFRQQHFWLRQV
orientation
%HVXUHFDEOHLVFRQQHFWHGVHFXUHO\DQGRULHQWHGSURSHUO\5HVHDWDOOFRQ -
nections. Small latch on connector should line up and snap into place.
5HVLVWDQFHKDQGOHEDU
connection
%HVXUHFDEOHIURPULJDQGOHEDUDQGFDEOHVWR&RQVROHDUHVHFXUH
and undamaged.
Check Servo Motor (requires
shroud removal) ,IPDJQHWVPRYHDGMXVWXQWLOWKH\DUHZLWKLQWKHSURSHUUDQJH5HSODFH
Servo Motor if not functioning properly.
0&%UHTXLUHVVKURXGUHPRYDO 5HSODFH0&%
If the above steps do not resolve the problem, contact Customer Care for
further assistance.
,QFOLQHGRHVQRWDGMXVWPDFKLQH
turns on and operates)
Check Console &KHFNIRUYLVXDOVLJQWKDW&RQVROHLVGDPDJHG5HSODFH&RQVROHLIGDPDJHG
Incline handlebar connection %HVXUHFDEOHIURPOHDQGOHEDUDQGFDEOHVWR&RQVROHDUHVHFXUH
and undamaged.
/RZHUDQG8SSHU,2&DEOHV
(requires shroud removal)
$OOZLUHVLQWKHFDEOHVVKRXOGEHLQWDFW,IDQ\DUHFXWRUFULPSHGUHSODFH
cable.
,QFOLQH$GMXVWHU$VVHPEO\
(requires shroud removal)
%HVXUH,QFOLQH$GMXVWHU$VVHPEO\LVDWWDFKHGWR,QFOLQH0RWRUGULYHVFUHZ
If the above steps do not resolve the problem, contact Customer Care for
further assistance.
Console shuts off (enters sleep
mode) while in use
Check electrical (wall) outlet Make sure unit is plugged into a functioning wall outlet.
Check connection at front of unit &RQQHFWLRQVKRXOGEHVHFXUHDQGXQGDPDJHG5HSODFHDGDSWHURUFRQQHF -
tion at unit if either are damaged.
Check data cable integrity $OOZLUHVLQWKHFDEOHVKRXOGEHLQWDFW,IDQ\DUHFXWRUFULPSHGUHSODFH
cable.
Check data cable
FRQQHFWLRQVRULHQWDWLRQ
%HVXUHFDEOHLVFRQQHFWHGVHFXUHO\DQGRULHQWHGSURSHUO\6PDOOODWFKRQ
connector should line up and snap into place.
5HVHWPDFKLQH 8QSOXJXQLWIURPHOHFWULFDORXWOHWIRUPLQXWHV5HFRQQHFWWRRXWOHW
Check magnet position (requires
shroud removal)
Magnet should be in place on pulley.
Check Speed Sensor (requires
shroud removal)
Speed sensor should be aligned with magnet and connected to data cable.
5HDOLJQVHQVRULIQHFHVVDU\5HSODFHLIWKHUHLVDQ\GDPDJHWRWKHVHQVRURU
the connecting wire.
Fan will not turn on or will not
turn off
Check data cable integrity $OOZLUHVLQFDEOHVKRXOGEHLQWDFW,IDQ\DUHFXWRUFULPSHGUHSODFHFDEOH
Check data cable
FRQQHFWLRQVRULHQWDWLRQ
%HVXUHFDEOHLVFRQQHFWHGVHFXUHO\DQGRULHQWHGSURSHUO\6PDOOODWFKRQ
connector should line up and snap into place.
5HVHWPDFKLQH 8QSOXJXQLWIURPHOHFWULFDORXWOHWIRUPLQXWHV5HFRQQHFWWRRXWOHW
Fan will not turn on, but Console
operates
Check for blockage of fan 8QSOXJXQLWIURPHOHFWULFDORXWOHWIRUPLQXWHV5HPRYHPDWHULDOIURPIDQ,I
QHFHVVDU\GHWDFKWKH&RQVROHWRKHOSZLWKUHPRYDO5HSODFHWKH&RQVROHLI
unable to remove blockage.
8QLWURFNVGRHVQRWVLWOHYHO &KHFNOHYHOHUDGMXVWPHQW $GMXVWOHYHOHUVXQWLOPDFKLQHLVOHYHO
Check surface under unit $GMXVWPHQWPD\QRWEHDEOHWRFRPSHQVDWHIRUH[WUHPHO\XQHYHQVXUIDFHV
Move machine to level area.