Bovie AARON 2250, Руководство по обслуживанию

Страница: 53 / 106

ACTIVATING THE UNIT
NOTICES :
When you turn on your unit remember the following features:
The Aaron 2250 will power up to the last used modes and last used settings.
During activation, the activated mode can be adjusted up and or down a maximum of four steps.
Refer to the following table for power increments.
1. Monopolar Cut – select the mode of operation for Cut or Blend then select the desired Cut power settings by
pressing the up and down buttons next to the Cut power output display.
2. If using Blend, vary the blend setting by pressing the up and down buttons next to the blend amount indicator
graph.
3. Monopolar Coag – select the mode of operation for coagulation: Coagulation or Fulguration, then select the
coagulation power settings by pressing the up and down buttons next to the Coag power output display.
4. Bipolar – adjust the Bipolar power settings by pressing the up and down buttons next to the Bipolar power
output display.
5. Activate the generator by pressing the appropriate button on the handpiece or pedal on the footswitch.
NOTICE:
Monopolar and bipolar footswitching operations are controlled by independent foot controls.
5-5 Ser vice Guide • Aaron 2250
POWER SETTINGS INCREMENTS FOR INSTANCE...
1-50 Watts 1 Watts
While activated, the Cut power output of 30 watts can be adjusted
4 steps down to 26 watts or 4 steps up to 34 watts.
51-100 Watts 2 Watts
101-200 Watts 5 Watts