manualshive.com logo in svg

Bovie AARON 2250, Руководство по обслуживанию

Поделиться
Скачать
Bovie AARON 2250 Скачать руководство пользователя страница 3

SAFETY PRECAUTIONS WHEN OPERATING THE GENERATOR

The safe and effective use of electrosurgery depends to a large degree on factors solely under the control of the 
operator. There is no substitute for a properly trained and vigilant medical staff. It is important that they read, 
understand, and follow the operating instructions supplied with this electrosurgical equipment.

To promote the safe use of the Aaron 2250, please refer to the User’s Guide for standard operating precautions.

APPLICABLE SAFETY STANDARDS

CSA C22.2, NO. 601.1 - M90
UL 2601 - 1 - UL
IEC 60601 - 2 - 2 (2001-09) Part 1-2
CENELEC EN 60601 - 1 Part 1
IEC 60601 - 2 - 2 (1998-09) Part 2-2
IEC 60601 - 1 Part 1

CONVENTIONS USED IN THIS GUIDE

WARNING:

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious
injury.

CAUTION:

Indicates a hazardous situation which, if not avoided, may result in minor or moderate injury.

NOTICE:

Indicates an operating tip, a maintenance suggestion, or a hazard that may result in product 
damage.

iii

Ser vice Guide • Aaron 2250

Содержание AARON 2250











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды