CAUTION
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE
WITH THE APPLICABLE INSTALLATION CODE BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE PRODUCT AND THE HAZARDS
INVOLVED.
No loose strands or loose connections should be present. Secure
with U.L. certified wire connectors and electrical tape.
WARNING
The electricity MUST be turned off at the MAINS FUSE BOX
before installing this luminaires; turning the power off using
the light switch is not sufficient to prevent electrical shock.
Luminaries weighting 25 lbs (50 lbs for U.S.A) or more must
be mounted directly to the building structure, independently
of the electrical box; this installation should not be made on
a radiant heat type ceiling.
The luminaries is not intended to support external weight
other than the provided components.
ELECTRICAL CONNECTION - SAFETY
Attach grounding wire (green insulate or bare copper) from
the supplier circuit to the mounting bracket with the green
ground attachment screw provided.
Connect the grounding wire of the luminaries to the ground
conductor of the supply circuit. Attach all grounding conductors
to the mounting bracket with the green ground wire attachment
screw.
Referring to the Wire Connection Chart, connect the black and
white wires
ASSEMBLY INSTRUCTIONS
Please don't assemble the glass till you have
finished.
1_Drill the hole in the table, using the drawing
supplied or respecting it's measures
2_Take off the two A threaded studs and their nuts
and ends
3_Pass through the table the plug and the cord to
locate top plate leaning on the table, Take care with
the cord.
4_Place the B plate with the big hole from the bottom,
then re- screw the threaded studs. Secure the
assemble
CONNECTION CHART
NOTE
Due to LED manufacturing process characteristics,
luminaires including this light source may have a slight
variation in the light tone.
A
B
A
A
A
USB CHARGER: 5V Máx 1 Amp
Содержание Drip Biblio
Страница 4: ...40 8 8 105...
