27
OTHER FUNCTIONS
DESCALING FUNCTION
Default time is 50 minutes, which is not adjustable.
It is adviced to use a descaling agent that is suitable
for, for example, kettles and steam irons.
1. When the accumulated working time of the
evaporating heating pipe reaches 100 hours, the
system will remind the user to remove the scale
of the evaporating heater pipe (user can also
start the descaling function automatically). At
this moment, the descaling icon on the screen
will flash.
2. The descaling mixture (water and clearing
media) is prepared according to the mixing ratio
of 1:8 and then put into the water tank (5) after
an even mixing. The dosage of descaling mixture
in the water tank (5) may not be lower than the
descaling scale of water tank (5).
3. After the descaling mixture or agent is added
into the water tank (5) and the oven door (7) is
closed, press the SELECTION key (15 & 17) to
select the descaling function and then press the
ENTER key (18) to start the descaling work.
4. The countdown mode is used for the product.
When there are still 20 minutes, the user is
reminded to pull out the water tank (5) to drain
the descaling agent and replace the clean water.
After the water tank (5) is inserted, the machine
begins to work. When there are still 10 minutes,
the user is reminded again to pull out the water
tank (5) to replace the clean water. After the
water tank (5) is inserted, the machine begins
to work. After completion, the user will be
prompted.
SETTING KEY FUNCTION (14)
Presetting time
During any program selection or standby mode,
press setting key (14)“
”, it will start preset time
setting, and icon
is on, the Hour LED flashes
(Preset time is 0-24 hours adjustable), after the
hour is confirmed, the Minute LED flashes, after
minute confirmed time is set. Interface return
to program selection mode, press > < key select
program, after Program selected, press the ENTER
key (18) to start this selected program.
Presetting; After presetting the time is starting,
the preset time interface and selected program
interface will display alternately every 5 seconds.
When the program ends, the user can directly press
the POWER key to exit the program and the system
will automatically return to the standby mode.
Lighting function
After the key is activated, the illuminating light will
be ON for 3 minutes by pressing the key Lightning/
Child lock, and will go out by pressing the key again.
Children lock
After entering the working state, children lock icon
is ON by holding the key Lightning/Children lock,
and all keys or buttons are locked. They cannot
be unlocked unless the user holds down the key
Lightning/ Children lock again.
Water level detection protection
When the steam mode is started and a water
shortage is detected, the machine will stop working
and the buzzer will give an alarm, and all keys or
buttons will be are invalid. The machine resumes
work when water is added.
Open / close protection of oven door
In the door-opening state, the startup becomes
unavailable; during the working process, the
machine suspends the work if user opens the oven
door (7). The machine automatically resumes the
work after the oven door (7) is closed.
CLEANING
• Please turn off the steam oven and unplug the
power cord from the outlet before cleaning the
inside of the oven.
• Do not clean the bakeware surface with a metal
tool or grinding material because there is a non-
sticky coating on the surface.
• Please clean the inside frequently. When good
or grease is splashed onto the inner wall, it can
EN
Содержание 11.3128.00.00
Страница 2: ... THE BOURGINI COMPANY B V WWW BOURGINI COM Fig 1 Fig 2 ...
Страница 3: ...Fig 3 Fig 4 ...
Страница 4: ...Fig 5 ...
Страница 67: ...67 ...