background image

 
 

WARNING 

 

THIS PRODUCT CONTAINS ELECTRICAL POWER AND OTHER SENSITIVE 
COMPONENTS WITHIN ITS CASE, AND IS NOT DESIGNED FOR CONSUMER ACCESS OR 
REPLACEMENT OF COMPONENTS. IF YOUR BOUNDLESS TECHNOLOGIES PRODUCT 
REQUIRES REPAIR OR YOU WISH TO ADD ANY COMPONENT THAT REQUIRES 
OPENING THE PRODUCT CASE, YOU SHOULD CONTACT YOUR NEAREST AUTHORIZED 
SERVICE PROVIDER FOR ASSISTANCE. ANY ATTEMPT TO REPAIR YOUR PRODUCT OR 
ANY EFFORTS TO INSTALL OR REPLACE COMPONENTS WITHIN THE PRODUCT CASE 
BY AN UNAUTHORIZED PERSON COULD EXPOSE THAT PERSON TO RISK OF 
ELECTRICAL SHOCK AND WILL CAUSE YOUR PRODUCT WARRANTY TO BE VOID. 

 
 
 
 
 
 
 

 

 

It is the policy of Boundless Technologies, Inc. to improve products as 
new technology, components, software, and firmware become available. 
Boundless Technologies, therefore, reserves the right to change 
specifications without prior notice. 

All features, functions, and operations described herein may not be 
marketed by Boundless Technologies in all parts of the world. In some 
instances, photographs are of equipment prototypes. Therefore, before 
using this document, consult your Boundless Technologies 
representative or Boundless Technologies office for information that is 
applicable and current. 

Note that Boundless Technologies appreciates receiving suggestions 
and comments on its publications. After reading this guide, please 
comment and return the comment sheet that has been provided. 

 

Copyright © 1999   Boundless Technologies, Inc.  
Hauppauge, New York 

Содержание Ethernet Interface Adapter



















Отзывы: