Minimum
###mm
Minimum
###mm
Minimum
###mm
Docks must be mounted with at least
these minimum distances between
them.
Installing multiple units closer to each
other than this may result in being
unable to Dock or Undock your Luna
effectively.
We do not recommend using this
mounting option if installing Luna Go.
Where possible, we recommend
routing the Luna Dock Cable behind
your mounting surface.
3.1.11
Vertical Surface Mounting Guidelines
2
1
4
5
6
3
It is only possible to reset the Luna Dock whilst
it is powered.
Dock Reset Button
Fixing from Below or Fixing from Above
Freestanding Base
*Proceed to 6.5.4 if you installation does
not allow access to the Dock Reset Button
from below your installation surface.
Rest the Freestanding Base on a soft surface
to prevent damage to the assembly. The
Rear Dock USB Cover doesn’t need to be
removed to reset the Dock.
or
J
I
Ensure the correct reset level is used .
The appropriate reset level will be
highlighted by the Troubleshooting flow
charts.
The level of reset will dictate what is
necessary to return the Dock to its correct
operating state.
Dock Reset Button
Only follow if there is no access to the
Dock Reset Button from below your
mounting surface.
6.5.1
Dock Reset Access
6.5.2
6.5.3
6.5.4
2
3
4
5
1
6
010 MR-Instruction Manual.indd Spread 12 of 30 - Pages(12, 49)
010 MR-Instruction Manual.indd Spread 12 of 30 - Pages(12, 49)
13/07/2015 17:36:03
13/07/2015 17:36:03
