Boulevard VFLL60FP72LN-1, Инструкция по установке и руководство пользователя

Страница: 4 / 62

36776-0-0716 Page 4
BEFORE YOU START
Sample Warnings and Definitions:
DANGER
Indicates a hazardous situation which, if not avoided, will result
in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
Notice :
Addresses practices not related to personal injury.
Installation Information
1. Read the soot prevention information on page 7.
2. Read the safety information on pages 12 - 13.
3. Frame the opening. See page 23 and 27.
4. Install the gas lines. See page 20.
5. Install the wiring. See pages 32 - 33.
6. Install the remote system. See page 38.
7. Light the fireplace and troubleshoot.
See pages 36 and 42 - 44.
8 For detailed instructions on operating the Proflame - IP
Control System see pages 56 - 60.
9. For detailed instructions for the LED Controls, see page 55.
10. Show the homeowner how to operate the fireplace,
see page 53.
11. Show the homeowner how to do the basic maintenance.
Installation Considerations - Fireplace Installation
Guidelines
Determine where to install the fireplace. The fireplace can be
mounted on any of these surfaces:
1. A flat hard combustible or non-combustible surface.
2. A raised platform of combustible or non-combustible
material.
If the fireplace is installed directly on carpeting, tile or other
combustible material other than wood flooring, it must be installed
on a metal or wood panel extending the full width and depth of
the fireplace.
This fireplace is designed to be installed in a zero-clearance
enclosure. This means combustible material such as framing
lumber can come in contact with the top and side standoff
spacers, and secured to combustible framing using the framing
brackets provided.
Determine the following before installation:
• Any desired accessories
• Gas supply piping (left side entrance).
• Electrical connections
• Electrical supply requirements for light.
(120V, 60Hz, 1 Amp) (left side entrance)
Finishing Options
Choose the finishing option.
Option 1 - Clean Face: This type of installation (page 22) will
allow for finishing around the fireplace opening with high
temperature paint.
Option 2 - Flush Mount: This type of installation will allow
you to apply tile, marble, stone or other non-combustible material
over the face of the fireplace cabinet, up to the fireplace
opening flange.