MAINTENANCE
Your Fishin’ Buddy™ 2202 should work reliably for many years, however, there are a few things
you may want to consider and check periodically:
• When cleaning the acrylic display lens, do not use ammonia or alcohol-based cleaners.
• If possible, periodically clean the surface of the transducer with soap and water to remove
any oil film. Oil and dirt on the transducer will reduce the sensitivity or may completely
inhibit transducer operation.
• Consider using commonly available corrosion inhibitors on the back-panel connectors in
harsh environments.
CAUTION:
Facing the screen toward the sun for extended periods may cause the display to reach its
upper temperature limit and turn black. If this occurs and you cannot adjust it lighter, immediately cover
the screen or turn it away from the sun.
CAUTION:
The Fishin' Buddy 2202
TM
may not operate properly if the outside temperature is below 14
F (-10 C) or exposure to the sun or other heat sources causes the case to reach 140 F (60 C).
Permanent damage will occur to the liquid crystal display if stored or used where the temperature is
below -4 F (-20 C) or exposure to the sun or other heat sources causes the case to reach 158 F (+70 C).
This type of damage is not covered by the warranty.
19
FB2202_English.qxp 3/14/2006 12:06 PM Page 20
